научная статья по теме СОДЕРЖАНИЕ ЖУРНАЛА «СУДОСТРОЕНИЕ» ЗА 2014 ГОД Машиностроение

Текст научной статьи на тему «СОДЕРЖАНИЕ ЖУРНАЛА «СУДОСТРОЕНИЕ» ЗА 2014 ГОД»

Appolonov E. M. Future of education in shipbuilding sector lies in enhancing of cooperation between shipbuilding industry and navy

This article presents main statements of strategy developed in SMTU (SPb) and related to enhancement of cooperation with shipbuilding companies focused on resolving a problem of lack of qualified personnel. It is planned to upgrade training level of graduates by creating basic departments at leading shipbuilding enterprises. These departments shall be united in larger blocks each specializing in certain field of main research activities.

Keywords: navigation safety, human factor,

crew, personnel training.

Kostylev I. I., Myasnikov Y. N., Petukhov V. A. Navigation safety and training of marine engineers

This article reviews issues related to advancement of engineers training level and practical training level of transport ships command personnel. It is considered, that navigation safety issues must be jointly resolved by education institutions and shipping companies. Keywords: vibration insulation, pipeline sys-

tems, dynamic parameters, frequency-amplitude parameters, non-linear supports.

Lesnyak A. N., Spiridonov A. Y., Pshenitsyn A. A. Survey of dynamic parameters of pipeline systems with non-linear supports

The authors narrate about control of pipeline systems behavior under oscillations. Provided are results of theoretical and experimental research of pipeline dynamic parameters.Received are dependencies of these values from level of dynamic deformations of full metal elastic-damping elements. Alteration of system's free oscillation frequencies due to alteration of excitation amplitude was analyzed. Achieved results can be used for development of special vibration insulations.

Keywords: separate bearing, liquid friction,

internal lubricant circulation.

Khabarov A. A., Kokotkov N. I., Alpin A. Y. All about necessity and method of pump effect creation in lubricant layer of independent supporting bearing-pump

This article analyzes necessity and method of pump effect creation in lubricant layer of independent supporting bearing, which can also be called «bearing-pump».

Keywords: bellows expansion joints, dis-

charging gear, efficiency.

Rozinov A. Y., Vakulov P. S., Anukhin V. I. Efficiency of structural and technological conversion of discharging gear in shift-rotary bellows expansion joints used in ship pipelines.

This article describes new shift-rotary bellows expansion joint with discharging gear in the form of elastic rod placed inside the corrugated bellow which can extend functional and technological capabilities of expansion joint due to shifting and rotation ability in various planes and adjustability of its length during installation in ship pipeline system

Keywords: vibration processing, residual

stresses, form stabilization, welding deformations.

Mikhailov V. S., Popova N. S., Kolomeyets N. P. Technologies and equipment for vibro-active processing of welded structures

Vibro-active processing of welded structures — infrasonic vibration processing (IVP) and ultrasonic vibration processing (UVP) facilitate reduction of stresses and deformation of hull structures being manufactured and increases their strength, reliability and operational capabilities. New modifications equipped for IVP and UVP are ergonomic, reliable and convenient for operation. Keywords: fishingvessel, leasing, financing,

lifecycle.

Gerasimov A. A., Sheingals E. S. JSC «Yantar». Economic background for building the fishing fleet

The authors hereby analyze current status of domestic fishing fleet, economic background for building such vessels at BSC JSC «Yantar», project financial structure with participation of national export credit agencies.

Keywords: state defense order, pricing, per-

spective price, ships, building. Kuchenov S. G., Charupa V. M. Some issues related to pricing of ships built under governmental defense order

The authors narrate about special pricing features for ships delivered under governmental defense order, which are not described in regulatory legal documents.

Keywords: ship lifting, lifting pontoon, lifting

capacity, structure, technical specifications.

Kramorenko A. V., Erokhin A. G., Ageev A. S. Advanced technical equipment of Russian Navy for lifting the sunken ships

Existing domestic ship lifting gear is completely obsolete. It is required to create new ship lifting equipment which would be universal, mobile, adaptable and have sufficient lifting capacity for any object located at any depth. This article describes sectional ship lifting pontoon, which meets all abovementioned requirements and has sufficient potential to become standard equipment for lifting of sunken ships.

Keywords: naval shipbuilding, heraldry, ship's

emblem, ship's standard, ship's decoration.

Tsekhanovskaya O. K. History of emblems on Russian naval ships

The author narrates about development of ship's decoration on Russian ships in 17-th—20-th centuries, including ship's emblem as its essential part.

Keywords: naval shipbuilding, history of fleet,

sailing ships construction, wooden shipbuilding technology. Grebenshikova G. A. Some aspects of Russian shipbuilding in the early 19-th century

This article reviews various aspects of Russian shipbuilding, from lumber storage and application for building ships of various classes to ship design, construction and trials during reign of Alexander I.

СОДЕРЖАНИЕ ЖУРНАЛА «СУДОСТРОЕНИЕ» ЗА 2014 год

Алешкин А. Н. ОАО «ЦТСС» - 75 лет! № 4, с. 3.

Премьер-министр посетил Хабаровский судостроительный завод, № 3, с. 3.

Совещание о долгосрочных программах развития авиастроительной и судостроительной корпораций, № 6, с. 4.

Совещание по вопросу создания судостроительного комплекса на Дальнем Востоке, № 6, с. 3.

75 лет на рубеже передовых технологий, № 4, с. 4.

НА СУДОСТРОИТЕЛЬНЫХ ПРЕДПРИЯТИЯХ

№ 1, с. 3; № 3, с. 3; № 3, с. 4; № 4, с. 14; № 5, с. 3; № 6, с. 5.

ГРАЖДАНСКОЕ СУДОСТРОЕНИЕ

Апполонов Е. М., Таровик О. В. Определение масс конструкций ледовых усилений транспортных судов на ранних стадиях проектирования, № 5, с. 14.

Бойко М. С., Кутейников М. А., Одегов В. С. Основные направления совершенствования требований классификационных обществ к корпусу крупнотоннажных контейнеровозов, № 4, с. 20.

Головной ледокол «Владивосток» проекта 21900М спущен на воду, № 3, с. 8.

Дубровский В. А. Применение и перспективы совершенствования многокорпусных судов, кораблей и катеров, № 2, с. 22.

Дубровский В. А. Проектного обоснования не получилось, № 4, с. 35.

Егоров Г. В., Тонюк В. И., Калугина Н. Н. Три многофункциональных мелкосидящих буксира-снабженца проекта TG05 для Северного Каспия, № 4, с. 25.

Егоров Г. В., Тонюк В. И. Многоцелевые сухогрузные суда класса «Волго-Дон макс» дедвейтом 7150 т проекта RSD49 типа «Нева-Лидер», № 2, с. 9.

Егоров Г. В., Хаустов А. Н., Автутов Н. В. Серия многофункциональных аварийно-спасательных судов мощностью 4 МВт ледового плавания проекта VPSV07 типа «Спасатель Карев», № 1, с. 18.

Жинкин В. Б. Методика обработки и представления массива данных, относящихся к однородным объектам, однотипным процессам, № 5, с. 20.

Сазонов К. Е. Конференция «Полярная механика-2014», № 4, с. 34.

Сазонов К. Е. А. Н. Крылов о проектировании ледоколов, № 1, с. 15.

Таровик О. В., Косьмин М. С. Имитационное моделирование морских транспортных систем, работающих в ледовых условиях с соблюдением графика поставок, № 1, с. 9.

Францев М. Э. Использование параметрических методов на ранних этапах разработки проекта судна из композитных материалов, № 3. с. 10.

Францев М. Э., Францев И. М. Использование численных методов при реализации задачи параметрического проектирования композитного промыслового судна для прибрежного лова, № 4, с. 30.

Францев М. Э., Чуднов И. В. Новый облик судов на подводных крыльях для рек Сибири и Дальнего Востока, № 2, с. 18.

Ханухов В. К. Проектное обоснование характеристик исследовательских судов, обеспечивающих их мореходность, № 2, с. 26.

Хаустов А Н. «Спасатель Демидов» спущен на воду, № 5. с. 12.

ВОЕННОЕ КОРАБЛЕСТРОЕНИЕ

Антонов Г. Н. Крылатое наследие академика В. Н. Челомея, № 4, с. 37.

Афанасьев С. Н., Нефедович А. В. Совершенствование структуры спецификации проекта корабля — путь интеграции человека в автоматизированные системы управления перспективных кораблей, № 1, с. 32.

Баскаков А. Т., Черемхина Н. А., Подошвелев А. Н. Обеспечение пожаро-взрывобезопасных комплектов оружия в условиях эксплуатации на кораблях ВМФ, №2, с. 31.

Владимиру Николаевичу Пялову — генеральному конструктору атомных подводных крейсеров — 80 лет! № 1, с. 26.

Глухов Д. С. Танкер для ВМФ, № 3, с. 25.

Голланд В. А., Белый Д. О. Создание проектов адаптируемых модульных неатомных подводных лодок на основе военно-технического сотрудничества, № 1, с. 28.

ДВКД «Севастополь» спущен на воду, № 3, с. 17.

Договор еще на два атомохода, № 3, с. 35.

Илюхин В. Н., Прокофьев О. П. О концептуальных вопросах обеспечения спасания личного состава аварийных подводных лодок, № 6, с. 12.

Их именами названы: «Александр Обухов», № 4, с. 44.

Катанович А. А. Перспективы использования новых технологий в радиоприемной технике связи ВМФ, № 3, с. 22.

Крылов В. В. Б. К. Разлетов — создатель корпуса первой отечественной АПЛ проекта 627, № 3, с. 16.

Михайлов С. СКР «Адмирал Григорович» спущен на воду, № 2, с. 30.

Нефедович А. В., Ходьков Ю. Л. Дизайн-проект служебного помещения как актуальная разработка в системе эргономического обеспечения проектирования перспективного корабля, № 6, с. 17.

Новые корабли для ВМФ, № 4, с. 40.

Платонов А. В. Из истории создания приборов управления торпедной стрельбой в отечественном флоте, № 1, с. 35.

Поспелов В. Я. Первый год работы Совета военно-промышленной комиссии при Правительстве Российской Федерации по кораблестроению, № 3, с. 19.

Серийная постройка катеров, № 5, с. 11.

Хаустов А. Н. Подводная лодка «Новороссийск» принята в состав ВМФ России, № 5, с. 9.

ПОДГОТОВКА КАДРОВ

Апполонов Е. М. Будущее кор

Для дальнейшего прочтения статьи необходимо приобрести полный текст. Статьи высылаются в формате PDF на указанную при оплате почту. Время доставки составляет менее 10 минут. Стоимость одной статьи — 150 рублей.

Показать целиком